skysunpower
51.2V MASON-230N DIY Unit Without Cells (suitable CATL/GFB 206Ah/230Ah Cells
51.2V MASON-230N DIY Unit Without Cells (suitable CATL/GFB 206Ah/230Ah Cells
★Service: 10 Years Warranty
★Support: OEM,ODM,OBM,Customized
★Certificates: IEC,CE,ROHS,UN38.3,ISO etc.
The Mason 51.2V 230Ah LiFePO4 Energy Storage System delivers 11.7kWh of reliable power for residential, off-grid, and commercial applications.
Complete DIY battery kit delivering 11.78kWh for household use. Features BMS 3.0 protection and supports GF 206Ah, CATL 228Ah, EVE 230Ah, and CALB 230Ah cells. Stackable design allows up to 16 packs in parallel. Vertical version available.
Features
·Automotive-grade lithium battery
·Safer use
·Passive balancing
·Bluetooth monitoring
·Scalable energy storage
Technical specifications
BMS: Smart 16S 200A (Max 32pcs In Parallel)
Communication Protocol: CAN / RS485*2
Waterproof Class: IP20
Battery Box Size: (L*W*H)600*440*251mm
Weight: 30kg
Display: LCD Screen
Built-in battery management system
CAN/RS485*2 inverter communication
Advantages Of Our DIY Battery Case
1.Complete Kit: All-inclusive package simplifies the entire assembly process.
2. Intelligent BMS:Comprehensive protection and monitoring enhance system stability.
3.Passive Balancing: Optimizes performance and extends overall lifespan.
4.Scalable Design: Modular setup allows for flexible future expansion.
5.Solar Ready: Designed for seamless integration with home solar systems.
Package List
| Main Part | |
|---|---|
| 1 | 1 * Battery Case (Bottom case, Front Panel, Top Bracket, Front Bracket, Top cover) |
| 2 | 1 * 48V 200A 16S Seplos BMS |
| 3 | 1 * 58V 400A Fuse |
| 4 | 4 * Handle |
| 5 | 2 * PCB Board for BMS and Cell Connection |
| 6 | 3 * Upper and Lower Latch lock |
| 7 | 1 * LCD Screen |
| 8 | 1 * LCD Screen Sticker |
| 9 | 4 * Button Cap |
| 10 | 3 * Wires (LCD Screen wire, PCB board A and PCB board Connector) |
| 11 | 2 * Battery Terminals (P+ Terminal and P- Terminal) |
| Other Components | |
|---|---|
| 1 | 6 * Copper bus bars (BMS connection) |
| 2 | 15 * Aluminum bus bars (Cell connection) |
| 3 | 10 * Epoxy sheet (Between cell and the case) |
| 4 | 26 * EVA Tape (Between cells) |
| 5 | 1 * PC sheet (Top cover) |
| Screws Details | |
|---|---|
| 1 | 12 * Phillip Hex M4 * 8mm (PCB board fix) |
| 2 | 9 * Phillip Hex M5 * 8mm + Washer + Spring Set(Ground cable and top bracket fix) |
| 3 | 7 * Phillip Hex M6 * 25mm + Washer + Spring Set(Front Panel fix) |
| 4 | 10 * Phillip Round M3 * 8mm + Washer + Spring Set(BMS and LCD Screen fix) |
| 5 | 12 * Phillip Pan M5 * 10mm (Latch fix) |
| 6 | 16 * Hexagon Socket Pan M4 * 10mm (P+/P- Terminals fix) |
| 7 | 42 * Hexagon Socket Countersunk M4 * 10mm (Handle and battery case) |
| 8 | 4 * Phillip Hex M6 * 14mm + Washer + Spring Set(foot fix) |
| 9 | 5 * Phillip Hex M8 * 10mm + Washer + Spring Set (P+/P- Bus bar fix) |
| 10 | 8 * Phillip Round M5 * 10mm + Washer |
Built-in Intelligent BMS
Intelligent Control System
- Overcharge, over-discharge, and overcurrent protection
- Active cell balancing for optimal performance
State Monitoring:
- Real-time SOC (State of Charge) calculation
- SOH (State of Health) estimation
- Voltage, current, and temperature monitoring
Communication:
- CAN and RS485 protocol support
- Compatible with inverters and monitoring systems
- Remote control and data exchange
Fault Diagnosis:
- Real-time fault detection and alerts
- Event logging with timestamps
- Diagnostic codes for troubleshootin
Highly Compatible with Various Inverters
Compatible with all Pylontech-protocol inverters via CAN or RS485. Supported brands include PYLONTECH, SUNSYNK, Afore, Growatt, SMA, SOROTEC, GOODWE, Victron Energy, Deye, SOFAR SOLAR, Voltronic Power, and Sol-Ark. Custom protocol matching available upon request.
Suitable for a Wide Range of Applications
11.7KWh DIY battery case are widely applicable to the following scenarios:Home Energy Storage, Commercial Storage, Industrial Backup Power, Off-Grid Power Systems, Grid-Tied Power Systems, and Uninterruptible Power Supplies (UPS) etc.
